admin
Site Admin
Joined: 03 Jan 2007
Posts: 12
|
 Posted: Tue Mar 24, 2009 8:43 am Post subject: iPhone 3G - JailBreak |
 |
|
Step-by-Step Guide to Jailbreak iPhone 3G running Firmware 2.2.1 using QuickPwn 2.2.5-2 (Windows)
NOTE: HACKING YOUR IPHONE CAN VOID THE WARRANTY. ATTEMPT AT YOUR OWN RISK
BEFORE WE BEGIN
- Download the below software and unzip to your computer
| Code: |
http://rapidshare.com/files/212968658/iPhone3G_JB.part1.rar
http://rapidshare.com/files/212972479/iPhone3G_JB.part2.rar
http://rapidshare.com/files/212982934/iPhone3G_JB.part3.rar
|
STEP 1: UPGRADE ITUNES TO 8.0.2
STEP 2: You need to install .Net Framework runtimes and associated files (if not already installed) for Quickpwn to work.
STEP 3: Connect your iPhone 3G to your computer via USB cable and launch iTunes and select your iPhone.
STEP 4: Hold the SHIFT key and click the “Restore” button. iTunes will launch a file dialog for you to select the firmware file. Locate the iPhone1,2_2.2.1_5H11_Restore.ipsw file that you have downloaded above and click “Open”.
STEP 5: iTunes will then restore your iPhone with firmware 2.2.1 which takes sometime, please wait for the process to complete.
Once your iPhone 3G is updated to iPhone firmware 2.2.1, you are ready to use the QuickPwn tool to jailbreak it.
1.Launch QuickPwn from the unzipped folder to start jailbreaking your iPhone 3G.
2.Please ensure that your iPhone 3G is connected to your computer. QuickPwn will automatically detect it and enable the blue arrow button, click it to continue.
3.In the next screen, click browse and select the iPhone firmware 2.2.1 that you had downloaded and click Open.
4.QuickPwn will check if the firmware file selected is the same as the one installed on your iPhone 3G, if valid it will enable the blue arrow button, click it to continue.
5.In the next screen, you will be prompted to install Cydia, Installer (both are preselected) and if you would like to Replace the Boot Logos. Install both Cydia and Installer as you will need it to install Dev team's unlock yellowsn0w application and also to install jailbreak apps.
6.QuickPwn will again prompt you to ensure that your iPhone 3G is connected to your computer via USB, click the blue arrow button to continue.
7.QuickPwn will now automatically put your iPhone into recovery mode. Once its in recovery mode you will be prompted to: Hold the Home button for 5 seconds, Hold the Home and Power buttons for 10 seconds, then release the Power button and continuing holding the Home button until your iPhone is in DFU mode.
8.Its important that you follow the instructions carefully, if it does not work and get an error message then try again, once your iPhone 3G is in DFU mode QuickPwn will start the jailbreaking process.
9.QuickPwn will inform you as soon as the jailbreaking process is successfully completed.
10.After your iPhone 3G reboots, it will be jailbroken and will have Cydia and Installer apps installed and visible on your iPhone's home screen.
 |
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
